DECKEL FP compatibility
Tools and special accessories of the manual DECKEL FP series can be used; the manufacturer offers these machines as a replacement for the conventional DECKEL FP series.
New universal milling machines
FPS 300M / 500M-hydro
Manual universal milling and drilling machines with digital readout
300 / 500 mm X travel
600 × 240 / 800 × 480 mm Angle table
±90° Milling head swivel
ISO 40 Tool holder (DIN 69871)
3,000 1/min Max. speed (500M-hydro)
ⓘ Manufacturer data (FPS product page, 300M / 500M-hydro brochure, 300M data sheet and 500M-hydro details sheet). Values may change and vary; not binding on Boztaş.
Why 300M / 500M-hydro?
Vertical and horizontal
The milling head turns 180° to switch from vertical to horizontal and swivels ±90° for angled holes; the vertical spindle extends 60 / 80 mm as a drilling quill, and the head shifts an extra 100 / 150 mm in Y.
Easy maintenance
Automatic central lubrication for all axes and the vertical milling head; main units accessible from the rear; coolant tank integrated in the machine base.
Variants
FPS 300M
X/Y/Z 300/160/340 mm, mechanical M16 drawbar (option DECKEL S20×2), 16 speeds 40–2,000 rpm via 8 gear stages, FPS Aktiv digital readout; horizontal milling spindle standard.
Suited to: Entry into milling and drilling, training workshops, tight floor space
FPS 500M-hydro
X/Y/Z 500/400/400 mm, hydraulic tool clamping (DIN 69872, option DIN 2080), 7.0 kW direct drive 25–3,000 rpm stepless, Heidenhain Positip 8016 touch readout; horizontal spindle optional (quill approx. 100 mm).
Suited to: Larger parts: 800 × 480 mm table, 300 kg load
Technical data
| Feature | 300M | 500M-hydro |
|---|---|---|
| Axes and travels | ||
| X / Y / Z travel (mm) | 300 / 160 / 340 | 500 / 400 / 400 |
| Additional Y shift of milling head (mm) | 100 | 150 |
| Extended X–Y working area (mm) | 300 × 260 | 500 × 550 |
| Table | ||
| Rigid angle table, clamping surface (mm) | 600 × 240 | 800 × 480 |
| T-slots | 12H7, spacing 45 mm | 6 × 14H12 + centre slot 14H7, spacing 63 mm |
| Permissible table load (kg) | 200 | 300 |
| Spindle | ||
| Vertical spindle, drilling quill stroke (mm) | ~60 | ~80 |
| Horizontal spindle | Standard (non-extending) | Option, quill approx. 100 mm |
| Milling head, manual swivel | ±90° | ±90° |
| Tool clamping | ||
| Tool holder | ISO 40 DIN 69871 | ISO 40 DIN 69871 |
| Drawbar system | Mechanical M16 (option DECKEL S20×2) | Hydraulic DIN 69872 (option DIN 2080) |
| Motor and drive | ||
| Main drive power (kW) | 1.4 / 1.8 (100 / 25 % duty) | 7.0 |
| Torque (Nm) | — | 156 |
| Speed range (rpm) | 40–2,000, 16 speeds (8 gear stages) | 25–3,000, stepless (direct drive) |
| Feed | ||
| Feed rate, stepless (mm/min) | 5–500 | 5–500 |
| Rapid traverse (m/min) | 1.5 | 1.5 |
| Per handwheel revolution (mm) | X 4.0 / Y, Z 2.5 | 2.5 |
| Control | ||
| Readout | FPS Aktiv 3-axis digital readout, swivelling panel | Heidenhain Positip 8016, 12" touch screen |
| Power supply | ||
| Mains / connected load | 3 × 400 V AC, 50 Hz / 6 kVA | 3 × 400 V AC, 50 Hz / 7 kVA |
| Dimensions and weight | ||
| Floor space W × D × H (mm) | 1,735 × 1,465 × 1,760 | 2,000 × 2,100 × 2,010 |
| Weight incl. table, milling head and control cabinet (kg) | ~910 | ~1,600 |
Manufacturer data (FPS product page, 300M / 500M-hydro brochure, 300M data sheet and 500M-hydro details sheet). Sources differ: for the 300M the series page gives 1,200 mm/min rapid and approx. 710 kg + 140 kg cabinet; the web page states 5 T-slots, the brochure 4. The 500M-hydro torque is listed in the brochure column "FPS 500M"; the series page states a 500 × 500 mm X–Y area.
Technical data is taken from information published by the manufacturer. The manufacturer may change it without notice, and values may vary with the model and the machine configuration. The data is for information only and is not binding on Boztaş; binding values are stated only in a written quotation.
Processes that can be combined on this machine
- Vertical milling
- Horizontal milling
- Drilling (with quill)
- Angled drilling and milling (±90°)
Frequently asked questions
What is the main difference between 300M and 500M-hydro?
The 300M is smaller and more compact: X/Y/Z 300/160/340 mm, 600 × 240 mm table, mechanical M16 drawbar, 40–2,000 rpm geared drive, approx. 910 kg. The 500M-hydro offers X/Y/Z 500/400/400 mm, an 800 × 480 mm table, hydraulic tool clamping and a 7.0 kW stepless direct drive (25–3,000 rpm), approx. 1,600 kg.
Can DECKEL FP tools and accessories be used?
Yes; the manufacturer states that tools and special accessories of the manual DECKEL FP series can be used. On the 300M the DECKEL S20×2 drawbar thread is available as an option.
Other FPS models
FPS 500M-digital / 630M-digital Dualmaster universal milling machines with Heidenhain Positip 8016 straight-cut control 500 / 630 mm450 / 400 mm20–5,000 1/min Technical data 
FPS 425M-NC / 630M-NC Dualmaster universal milling machines with Siemens or Heidenhain continuous-path control; hybrid use with optional handwheels 425 / 630 mm450 / 400 mm0–5,000 1/min Technical data 
FPS 420M-NC / 620M-NC Universal milling machines with mechanical handwheels and Siemens or Heidenhain continuous-path control 420 / 620 mm350 / 400 mm340 Nm Technical data