Presses Haulick + Roos
High-speed precision presses
IndustriesAutomotiveMachine BuildingMould and DieElectricalDomestic Appliances
Machines
High-speed precision presses and stamping-bending machines
Two routes to series parts from sheet and strip. Haulick + Roos high-speed precision presses run at 500–1,600 kN and up to 1,050 strokes per minute, producing precise, high-volume parts from thin strip such as connectors, contact parts and rotor-stator laminations. Its precision stamping and forming presses cover 250–5,000 kN at up to 400 strokes per minute for deep drawing, forming and thicker sheet. On Bihler multi-slide machines, stamping takes place in the press section, followed by bending, welding and assembly on the same machine.
Sub-types
High-speed precision press (500–1,600 kN)Precision stamping and forming press (250–5,000 kN)Multi-slide stamping and bending machineLine solutions: feeding, straightening, tooling
Presses 
Wire and strip forming 
Bihler multi-slide machines and production systems
Connectors, contacts, busbars and hairpins from wire and strip; stamping, bending, welding and assembly in one machine.
IndustriesE-mobilityAutomotiveElectrical engineeringConnectors and contactsMetal goodsHousehold technologyMedical technologySprings and wire goods
Some of the parts made on these machines
-
Hairpin stator winding elements -
Copper and aluminium busbars -
Battery cell and module connectors -
Connector pins and contact springs -
Socket, switch and earthing contacts -
Circuit breaker components -
ESP coil assemblies -
Plain bearing bushings -
Hose clamps -
Wire springs and wire-formed parts -
Medical safety clips -
Charging-socket shielding sleeves -
Electric motor housings -
Stator interconnection circuits (ZSB) -
Battery grounding busbars -
Head restraint tubes -
Battery terminal clamps -
Connector housings with stitched pins -
Connectors for hydraulic valves -
Ring-shaped high-current contact lamellae -
Micro push-buttons -
Kick-over spring contacts for pressure switches -
Double-inlet fan impellers -
Child-seat anchor brackets
Models
Models and technical data
Each card leads to the model's technical data page: capacity, axes, dimensions and variants.
Haulick + Roos ROS 500–1,600 kN Precision high-speed stamping press with monoblock cast frame and full mass balancing 500–1,600 kN≤ 1,050 1/min1,000–2,000 mm Technical data 
Haulick + Roos RXLneo 250–1,000 kN Precision stamping and forming press, the alternative to the ROP from 250 to 1,000 kN 250–1,000 kN760–1,600 mm Technical data 
Haulick + Roos ROP 500–1,600 kN Precision stamping and forming press with KFS guide system and optional FSD servo drive 500–1,600 kN≤ 400 1/min1,000–2,000 mm Technical data 
Haulick + Roos ROP 2,000–3,150 kN Large precision stamping and forming press with three-part cast frame, optional planetary gear and FSD servo drive 2,000–3,150 kN≤ 250 1/min1,600–3,000 mm Technical data 
Haulick + Roos ROP 4,000–5,000 kN Large precision stamping and forming press with up to 3,500 mm tool space, planetary gear or FSD servo drive 4,000–5,000 kN≤ 100 1/min2,500–3,500 mm Technical data Technical data is taken from information published by the manufacturer. The manufacturer may change it without notice, and values may vary with the model and the machine configuration. The data is for information only and is not binding on Boztaş; binding values are stated only in a written quotation.
Workpieces
Presses: example workpieces
Electric motor rotor and stator laminations
Haulick + Roos · Electrical, Automotive, Domestic Appliances
E-mobility parts: cars, e-bikes, e-scooters
Haulick + Roos · Automotive
Automotive precision components and assemblies
Haulick + Roos · Automotive
Progressive and transfer die parts
Haulick + Roos · Mould and Die, Machine Building
Let us choose the right machine for your project together
To determine the most suitable machine type and model for you, we need information on the part or parts to be machined: material, technical drawings showing the tolerances and production quantities.