Monoblock cast frame
Monoblock press frame in nodular cast iron (GJS) with a closed oil circuit.
Precision stamping and forming presses
Haulick + Roos RXLneo 250–1,000 kN
Precision stamping and forming press, the alternative to the ROP from 250 to 1,000 kN
250–1,000 kN Nominal press force
760–1,600 mm Tool space (left to right)
ⓘ Manufacturer data (Haulick + Roos 250–1,600 kN product page, newsletter 10/2024 and the 2024 press overview table). Values may change and vary; not binding on Boztaş.
Why RXLneo 250–1,000 kN?
Double connecting-rod drive
Eccentric shaft on four rolling bearings and wide con-rod spacing; the slide runs in guide bushes above and below the strip line.
Adjustment and control
Electric-motor slide adjustment; automatic stroke adjustment and rotating mass balancing are options. PC control with colour touch display.
Technical data
| Feature | RXLneo 250 | RXLneo 320 | RXLneo 500 | RXLneo 630 | RXLneo 800 | RXLneo 1000 |
|---|---|---|---|---|---|---|
| Press | ||||||
| Nominal press force | 250 kN | 320 kN | 500 kN | 630 kN | 800 kN | 1,000 kN |
| Tool space, left to right (options) | 760 / 1,000 mm | 760 / 1,000 mm | 800 / 1,000 / 1,250 mm | 800 / 1,000 / 1,250 mm | 1,000 / 1,250 / 1,600 mm | 1,000 / 1,250 / 1,600 mm |
| Design | ||||||
| Press frame | Monoblock, nodular cast iron (GJS); closed oil circuit | Monoblock, nodular cast iron (GJS); closed oil circuit | Monoblock, nodular cast iron (GJS); closed oil circuit | Monoblock, nodular cast iron (GJS); closed oil circuit | Monoblock, nodular cast iron (GJS); closed oil circuit | Monoblock, nodular cast iron (GJS); closed oil circuit |
| Drive train | Double connecting rod, eccentric shaft on 4 rolling bearings, wide con-rod spacing | Double connecting rod, eccentric shaft on 4 rolling bearings, wide con-rod spacing | Double connecting rod, eccentric shaft on 4 rolling bearings, wide con-rod spacing | Double connecting rod, eccentric shaft on 4 rolling bearings, wide con-rod spacing | Double connecting rod, eccentric shaft on 4 rolling bearings, wide con-rod spacing | Double connecting rod, eccentric shaft on 4 rolling bearings, wide con-rod spacing |
| Slide guidance | Guide bushes above and below the strip line | Guide bushes above and below the strip line | Guide bushes above and below the strip line | Guide bushes above and below the strip line | Guide bushes above and below the strip line | Guide bushes above and below the strip line |
| Mass balancing | Rotating masses (option) | Rotating masses (option) | Rotating masses (option) | Rotating masses (option) | Rotating masses (option) | Rotating masses (option) |
| Slide and stroke adjustment | Electric-motor slide adjustment; automatic stroke adjustment optional | Electric-motor slide adjustment; automatic stroke adjustment optional | Electric-motor slide adjustment; automatic stroke adjustment optional | Electric-motor slide adjustment; automatic stroke adjustment optional | Electric-motor slide adjustment; automatic stroke adjustment optional | Electric-motor slide adjustment; automatic stroke adjustment optional |
| Control | ||||||
| Control | PC control with colour touch display | PC control with colour touch display | PC control with colour touch display | PC control with colour touch display | PC control with colour touch display | PC control with colour touch display |
Manufacturer data (Haulick + Roos 250–1,600 kN product page, newsletter 10/2024 and the 2024 press overview table). The manufacturer does not publish a detailed data table for the RXLneo; stroke, stroke rate, bolster dimensions and weight are not shown on this page. Tool-space options are given by press force in the overview table.
Technical data is taken from information published by the manufacturer. The manufacturer may change it without notice, and values may vary with the model and the machine configuration. The data is for information only and is not binding on Boztaş; binding values are stated only in a written quotation.
Processes that can be combined on this machine
- Stamping
- Piercing
- Cutting
- Bending
- Drawing
- Coining
Typical workpieces
- Electric motor laminations, rotor and stator laminations (Elektrobleche, Rotor-Stator-Bleche)
Related industries: AutomotiveMachine BuildingElectricalElectronics and ConnectorsDomestic AppliancesMedical
Frequently asked questions
What is the difference between the RXLneo and the ROP?
The RXLneo covers the 250–1,000 kN range. The ROP adds the KFS guide system and rotating mass balancing as standard; the ROP 500–1,600 kN series goes up to 2,000 mm tool space.
Other Haulick + Roos models
Haulick + Roos ROS 500–1,600 kN Precision high-speed stamping press with monoblock cast frame and full mass balancing 500–1,600 kN≤ 1,050 1/min1,000–2,000 mm Technical data 
Haulick + Roos ROP 500–1,600 kN Precision stamping and forming press with KFS guide system and optional FSD servo drive 500–1,600 kN≤ 400 1/min1,000–2,000 mm Technical data 
Haulick + Roos ROP 2,000–3,150 kN Large precision stamping and forming press with three-part cast frame, optional planetary gear and FSD servo drive 2,000–3,150 kN≤ 250 1/min1,600–3,000 mm Technical data 
Haulick + Roos ROP 4,000–5,000 kN Large precision stamping and forming press with up to 3,500 mm tool space, planetary gear or FSD servo drive 4,000–5,000 kN≤ 100 1/min2,500–3,500 mm Technical data