Large tool space
Tool spaces of 1,600, 2,000, 2,500 and 3,000 mm; 1,000 mm deep bolster, 790 mm passage between uprights and 500 mm die height.
Precision stamping and forming presses
Haulick + Roos ROP 2,000–3,150 kN
Large precision stamping and forming press with three-part cast frame, optional planetary gear and FSD servo drive
2,000–3,150 kN Nominal press force
≤ 250 1/min Stroke rate
1,600–3,000 mm Tool space (left to right)
200 mm Slide stroke (max.)
500 mm Die height (max.)
ⓘ Manufacturer data; Haulick + Roos ROP brochure and product page. Values may change and vary; not binding on Boztaş.
Why ROP 2,000–3,150 kN?
Three drive options
Flywheel (30–250 1/min), flywheel with planetary gear for high working capacity (20–180 1/min) and FSD servo drive (up to 5–250 1/min; maximum stroke rates via the second gear stage).
Rigidity and protection
Three-part GJS cast frame, double con-rod drive with four-bearing eccentric shaft, KFS guide system, roller slide guides and integrated hydraulic overload protection in the slide.
Variants
ROP 2000
Tool space 1,600 / 2,000 / 2,500 / 3,000 mm; flywheel 30–250 to 30–180 1/min; FSD 5–250 to 5–180 1/min; 44,000–59,000 kg
Suited to: Dies that need 2,000 kN
ROP 2500
Tool space 1,600 / 2,000 / 2,500 / 3,000 mm; flywheel 30–250 to 30–180 1/min; FSD 5–180 1/min; 45,000–60,000 kg
Suited to: Dies that need 2,500 kN
ROP 3150
Tool space 1,600 / 2,000 / 2,500 / 3,000 mm; flywheel 30–250 to 30–180 1/min; FSD 5–150 1/min; 46,000–61,000 kg
Suited to: Dies that need 3,150 kN
FSD servo driveoption
Slide speed slowed from any position over any stroke section; pre-programmed motion profiles for drawing, bending, coining and cutting; creep speed at full press force and handwheel try-out; switched off, the press runs like a classic eccentric press at higher output
Suited to: Parts needing variable forming speed, and die try-out
Technical data
| Feature | ROP 2000 | ROP 2500 | ROP 3150 |
|---|---|---|---|
| Press | |||
| Nominal press force | 2,000 kN | 2,500 kN | 3,150 kN |
| Tool space, left to right (options) | 1,600 / 2,000 / 2,500 / 3,000 mm | 1,600 / 2,000 / 2,500 / 3,000 mm | 1,600 / 2,000 / 2,500 / 3,000 mm |
| Slide stroke, fixed (max.) | 200 mm | 200 mm | 200 mm |
| Slide stroke, adjustable | 40–200 mm | 40–200 mm | 40–200 mm |
| Slide adjustment | 150 mm | 150 mm | 150 mm |
| Speed | |||
| Stroke rate, flywheel drive | 30–250 / 30–250 / 30–230 / 30–180 1/min | 30–250 / 30–250 / 30–230 / 30–180 1/min | 30–250 / 30–250 / 30–230 / 30–180 1/min |
| Stroke rate, flywheel with planetary gear | 20–180 1/min | 20–180 1/min | 20–180 1/min |
| Stroke rate, FSD servo drive | 5–250 / 5–250 / 5–230 / 5–180 1/min | 5–180 1/min | 5–150 1/min |
| Bolster and tool space | |||
| Max. die height (stroke down, adjustment up) | 500 mm | 500 mm | 500 mm |
| Bolster area (length × depth) | 1,600 × 1,000 / 2,000 × 1,000 / 2,500 × 1,000 / 3,000 × 1,000 mm | 1,600 × 1,000 / 2,000 × 1,000 / 2,500 × 1,000 / 3,000 × 1,000 mm | 1,600 × 1,000 / 2,000 × 1,000 / 2,500 × 1,000 / 3,000 × 1,000 mm |
| Slide clamping area (length × depth) | 1,600 × 950 / 2,000 × 950 / 2,500 × 950 / 3,000 × 950 mm | 1,600 × 950 / 2,000 × 950 / 2,500 × 950 / 3,000 × 950 mm | 1,600 × 950 / 2,000 × 950 / 2,500 × 950 / 3,000 × 950 mm |
| Passage between uprights | 790 mm | 790 mm | 790 mm |
| Bolster opening (length × depth) | 1,200 × 350 / 1,600 × 350 / 2,100 × 350 / 2,600 × 350 mm | 1,200 × 350 / 1,600 × 350 / 2,100 × 350 / 2,600 × 350 mm | 1,200 × 350 / 1,600 × 350 / 2,100 × 350 / 2,600 × 350 mm |
| Bolster plate height | 150 mm | 150 mm | 150 mm |
| Design | |||
| Press frame | Three-part, nodular cast iron (GJS); bolster serves as the oil tank | Three-part, nodular cast iron (GJS); bolster serves as the oil tank | Three-part, nodular cast iron (GJS); bolster serves as the oil tank |
| Drive train | Double connecting rod, eccentric shaft with 4 bearings, wide con-rod spacing | Double connecting rod, eccentric shaft with 4 bearings, wide con-rod spacing | Double connecting rod, eccentric shaft with 4 bearings, wide con-rod spacing |
| Guide system | KFS (slide guide + plunger guides in the frame); slide guided to below the strip line by roller guide elements | KFS (slide guide + plunger guides in the frame); slide guided to below the strip line by roller guide elements | KFS (slide guide + plunger guides in the frame); slide guided to below the strip line by roller guide elements |
| Mass balancing | Rotating masses | Rotating masses | Rotating masses |
| Slide adjustment and protection | Electric-motor slide adjustment (quick tool release and fine adjustment during operation optional); integrated hydraulic overload protection in the slide; stroke adjustment optional | Electric-motor slide adjustment (quick tool release and fine adjustment during operation optional); integrated hydraulic overload protection in the slide; stroke adjustment optional | Electric-motor slide adjustment (quick tool release and fine adjustment during operation optional); integrated hydraulic overload protection in the slide; stroke adjustment optional |
| Control | |||
| Control | Modular PC control with colour touch display; integrated process monitoring | Modular PC control with colour touch display; integrated process monitoring | Modular PC control with colour touch display; integrated process monitoring |
| Connections | |||
| Required air pressure | 6 bar | 6 bar | 6 bar |
| Dimensions and weight | |||
| Weight without feed (approx.) | 44,000 / 47,000 / 53,000 / 59,000 kg | 45,000 / 48,000 / 54,000 / 60,000 kg | 46,000 / 49,000 / 55,000 / 61,000 kg |
Manufacturer data; Haulick + Roos ROP brochure and product page. Multiple values are listed left to right by tool-space option (1,600 / 2,000 / 2,500 / 3,000 mm). The manufacturer's 2024 overview table gives the tool space in this force class as 1,600, 2,000 and 2,500 mm. The FSD stroke rate depends on the FSD variant. Model name: ROP 2500-2000 = 2,500 kN, 2,000 mm tool space.
Technical data is taken from information published by the manufacturer. The manufacturer may change it without notice, and values may vary with the model and the machine configuration. The data is for information only and is not binding on Boztaş; binding values are stated only in a written quotation.
Processes that can be combined on this machine
- Stamping
- Piercing
- Cutting
- Bending
- Drawing
- Coining
Typical workpieces
- Electric motor laminations, rotor and stator laminations (Elektrobleche, Rotor-Stator-Bleche)
- Parts for electric mobility (Teile für die Elektromobilität)
Related industries: AutomotiveEnergyMachine BuildingElectricalDomestic Appliances
Frequently asked questions
How do I choose between planetary gear and FSD?
The flywheel with planetary gear gives high working capacity with a sinusoidal slide motion (20–180 1/min). The FSD servo drive makes the slide speed programmable; in the slow gear stage it provides high working capacity similar to a planetary gear, in the fast stage stroke rates similar to a flywheel press.
What are the tool space and die height?
The bolster is 1,000 mm deep and 1,600–3,000 mm long; the slide clamping area is 950 mm deep. With the stroke down and the adjustment up, the die height is 500 mm; slide adjustment is 150 mm.
How heavy is the press?
The weight without feed is approx. 44,000 kg (ROP 2000-1600) to 61,000 kg (ROP 3150-3000); the required air pressure is 6 bar.
Other Haulick + Roos models
Haulick + Roos ROS 500–1,600 kN Precision high-speed stamping press with monoblock cast frame and full mass balancing 500–1,600 kN≤ 1,050 1/min1,000–2,000 mm Technical data 
Haulick + Roos RXLneo 250–1,000 kN Precision stamping and forming press, the alternative to the ROP from 250 to 1,000 kN 250–1,000 kN760–1,600 mm Technical data 
Haulick + Roos ROP 500–1,600 kN Precision stamping and forming press with KFS guide system and optional FSD servo drive 500–1,600 kN≤ 400 1/min1,000–2,000 mm Technical data 
Haulick + Roos ROP 4,000–5,000 kN Large precision stamping and forming press with up to 3,500 mm tool space, planetary gear or FSD servo drive 4,000–5,000 kN≤ 100 1/min2,500–3,500 mm Technical data