Several operations on one machine
Deep hole drilling, face milling, circular milling and tapping of square-shaped die, mould and fixture parts on the same machine.
Cross-table and special machines
TIBO KTE40-1000
Cross-table machine combining deep hole drilling, milling and tapping for die, mould and fixture parts
Ø 5–40 mm Solid drilling (steel)
1,000 mm Drilling depth
17 kW Spindle drive
6,000 1/min Spindle speed (max.)
800 × 350 mm X × Y travel
ⓘ Manufacturer data; KTE40-1000 data sheet and TIBO brochures. Values may change and vary; not binding on Boztaş.
Why KTE40-1000?
For mould cooling holes
TIBO targets cooling holes that are typically deeper than 40 × diameter; 1,000 mm drilling depth with tailored pressure and power monitoring.
Heavy-part capacity
940 × 800 mm clamping surface, 5,000 kg table load, X 800 / Y 350 / W 100 mm travel; 1,000 l tank and 140 bar coolant pressure.
Variants
KTE40-1000
Solid drilling Ø 5–40 mm in steel, 1,000 mm drilling depth, 17 kW / 6,000 1/min, Siemens 840D sl
Suited to: Die, mould and fixture holes up to Ø 40 mm
KTE25
1 or 2 drilling spindles; solid drilling Ø 25 mm
Suited to: Holes up to Ø 25 mm, two-spindle option
KTE15
1 or 2 drilling spindles; solid drilling Ø 15 mm
Suited to: Holes up to Ø 15 mm, two-spindle option
Technical data
| Feature | KTE40-1000 | KTE25 | KTE15 |
|---|---|---|---|
| Drilling | |||
| Solid drilling Ø (steel) | 5–40 mm | 25 mm | 15 mm |
| Drilling depth | 1,000 mm | — | — |
| Number of drilling spindles | — | 1 or 2 | 1 or 2 |
| Spindle | |||
| Spindle drive | 17 kW Siemens SINAMICS | — | — |
| Spindle speed (max., variable) | 6,000 1/min | — | — |
| Feed (variable) | 10–500 mm/min | — | — |
| Rapid traverse | 3,000 mm/min | — | — |
| Table | |||
| Travel, X direction | 800 mm | — | — |
| Travel, Y direction | 350 mm | — | — |
| Travel, W direction | 100 mm | — | — |
| Spindle centre to table top | 50 mm | — | — |
| Table load (max.) | 5,000 kg | — | — |
| Clamping surface | 940 × 800 mm | — | — |
| T-slots | Size 18, M16 | — | — |
| Coolant | |||
| Tank capacity | 1,000 l | — | — |
| Pump | 120 l/min, 7.5 kW | — | — |
| Coolant pressure (max.) | 140 bar | — | — |
| Option | |||
| Milling | Spot facing up to Ø 25 mm | — | — |
| Tapping | Up to M16 (trade-fair flyer: M24) | — | — |
| Modular expansion | Tailstock or other components such as fixtures | — | — |
| Control | |||
| Control | Siemens 840D sl | — | — |
| Dimensions and energy | |||
| Floor space | approx. 5,500 × 3,500 mm | — | — |
| Motors and cabinet cooling | IE3 efficiency class; Top Therm Blue e cabinet cooler | — | — |
Manufacturer data; KTE40-1000 data sheet and TIBO brochures. For KTE25 and KTE15 the data sheet gives only the number of spindles and the solid-drilling diameter (A = 250 mm); the same section lists a Y travel of 500 mm. The 2024 brochure gives the KTE series as solid drilling Ø 2–40 mm, counter-boring Ø 55 mm, up to 4 spindles, X up to 800 mm and Y up to 500 mm. The W travel is called Z in the English data sheet.
Technical data is taken from information published by the manufacturer. The manufacturer may change it without notice, and values may vary with the model and the machine configuration. The data is for information only and is not binding on Boztaş; binding values are stated only in a written quotation.
Processes that can be combined on this machine
- Deep hole drilling
- Face milling
- Circular milling
- Tapping
- Spot facing
Typical workpieces
- Cooling holes in moulds and mould frames (Kühlbohrungen in Formen und Formrahmen)
- Mould inserts (Formeinsätze)
- Square-shaped die, mould, prototype and fixture parts (quadratische Werkstücke im Werkzeug-, Formen-, Muster- und Vorrichtungsbau)
Related industries: Machine BuildingMould and Die
Frequently asked questions
How does the KTE40-1000 differ from a standard machining centre?
According to TIBO, mould cooling holes are typically deeper than 40 × diameter, a depth a standard milling centre cannot reach. The KTE40-1000 drills deep holes up to 1,000 mm and performs face milling, circular milling and tapping on the same machine.
How heavy can the workpiece be?
The table load is up to 5,000 kg on a 940 × 800 mm clamping surface (T-slots size 18, M16); travel is 800 mm in X and 350 mm in Y.
Which type is available for smaller diameters?
TIBO offers the KTE25 (solid drilling Ø 25 mm) and KTE15 (solid drilling Ø 15 mm) with 1 or 2 drilling spindles.
Other TIBO models
TIBO E10–E40 Modular gundrilling machines for solid drilling from Ø 2 to 40 mm Ø 2–40 mmØ 55 mm4,500 mm Technical data 
TIBO B80–B250 Modular BTA deep hole drilling machines for large-diameter solid drilling and counter-boring Ø 250 mmØ 400 mm12,000 mm Technical data 
TIBO DR series Modular rifling machines for constant or progressive twist in barrels and tubes Ø 4.5–155 mm10,000 mm1–4 Technical data