Separate 800 kN press module
The 800 kN two-point eccentric press is arranged separately beside the work plate; the extended press space makes room for larger cutting tools.
Processing centres
Bihler CC 1
COMBITEC processing centre with a separate 800 kN press module for long, bulky stamped and formed parts and sub-assemblies
200 1/min Stroke rate
800 kN Press force
160 kN Slide force (max.)
160 mm Strip width
Ø 10 mm Wire diameter
ⓘ Manufacturer data (Bihler CC 1 product page); depends on material and process. Values may change and vary; not binding on Boztaş.
Why CC 1?
Free work plate
The entire work plate is available for additional processing steps such as contact welding, tapping and screw insertion; the large centre aperture takes up to 4 central mandrels.
Long feeds, short set-up
NC feed units are available for long feed lengths; the rapid tool clamping system on all units shortens changeover times. Operation via the VariControl VC 1 control.
Technical data
| Feature | CC 1 |
|---|---|
| Performance | |
| Stroke rate | 5 – 200 1/min, stepless |
| Press | 800 kN two-point eccentric, stroke 30 mm; separate module beside the work plate |
| Slide units | max. 160 kN, stroke max. 140 mm |
| Tool area and feed | |
| Central mandrel | up to 4 |
| Feed | NC gripper feed: max. 500 mm; NC roller feed: unlimited |
| Material | |
| Strip thickness / width | max. 10 mm / 160 mm |
| Wire diameter | max. Ø 10 mm |
| Control | |
| Control | VariControl VC 1 |
| Equipment | |
| Tool clamping | Rapid tool clamping system on all units |
| Dimensions and weight | |
| Dimensions (W×D×H) | 4,200 × 1,900 × 2,600 mm |
| Weight | approx. 12,000 kg (depending on units and tooling) |
Manufacturer data (Bihler CC 1 product page); depends on material and process.
Technical data is taken from information published by the manufacturer. The manufacturer may change it without notice, and values may vary with the model and the machine configuration. The data is for information only and is not binding on Boztaş; binding values are stated only in a written quotation.
Processes that can be combined on this machine
- Stamping
- Bending
- Contact welding
- Tapping
- Screw insertion
Typical workpieces
- Longer and larger-sized stamped and formed parts and sub-assemblies (lange und voluminöse Stanzbiegeteile und Baugruppen)
- Bushes (Rundkörper)
Frequently asked questions
Why is the press of the CC 1 beside the work plate?
The 800 kN eccentric press is arranged as a separate module beside the work plate. This leaves the press space for larger cutting tools and the entire work plate for additional processing steps such as contact welding, tapping and screw insertion.
Which feed options does the CC 1 offer?
The NC gripper feed feeds up to 500 mm; with the NC roller feed the feed length is unlimited.
Other Bihler models
Bihler GRM 80 Universal multi-slide machine for large stamped and bent parts 250 1/min300–400 kN80 mm Technical data 
Bihler RM 40 Compact multi-slide machines for mass production of small precision stamped and formed parts 350 1/min90–200 kN60 mm Technical data 
Bihler RM 30K Compact multi-slide machine for mass production of small stamped and formed metal parts 350 1/min90 kN900 mm Technical data 
Bihler GRM-NC Universal servo multi-slide machine for small and medium batches 250 1/min400 kN90 mm Technical data 
Bihler RM-NC Servo multi-slide machine for small and medium batches with radial tooling 300 1/min200 kN80 mm Technical data 
Bihler BNC 4 Servo multi-slide production system compatible with MRP tooling 300 1/min200 kN31 kN Technical data 
Bihler BIMERIC BM Modular servo production and assembly system from raw material to ready-to-install assemblies 250 1/min400 kN80 mm Technical data 
Bihler BIMERIC SP Sub-assembly production system combining a servo press with the BIMERIC platform for progressive dies 250 1/min500 kN15–63 mm Technical data 
Bihler BM-HP 3000 Servo system producing complete electric-motor hairpins from flat wire on the coil 60–120/min3.2 m/s±0.02 mm Technical data 
Bihler LM 2000-KT / LM 2000-NC Modular linear machine platform with cam-controlled (KT) or servo-controlled (NC) units 500 1/min250 1/min2,000 mm Technical data 
Bihler SP 800 800 kN servo press for progressive tools; stand-alone or combined with the BIMERIC 800 kN200 1/min30 mm Technical data 
Bihler RM S High-speed multi-slide machine for stamped and formed parts made from high-tensile steels 600 1/min150 kN900 mm Technical data 
Bihler GRM 80B Bushing machine with a standardised tooling concept for mass production of straight and flanged bushings 220 1/min160 1/min15–40 mm Technical data 
Bihler MC 42 Multi-slide machine with two processing faces for small stamped and formed parts and sub-assemblies 350 1/min90 kN60 kN Technical data 
Bihler MC 82 Multi-slide machine with two processing faces for larger stamped and formed parts and sub-assemblies 250 1/min300 kN90 kN Technical data 
Bihler MC 120 Multi-slide machine with a 700 kN press and two processing faces for large stamped and formed parts and sub-assemblies 150 1/min700 kN160 kN Technical data 
Bihler MCS 1 High-speed multi-slide machine with two processing faces, running at up to 800 strokes per minute 800 1/min70 kN30 kN Technical data 
Bihler MCS 05 High-speed multi-slide machine with two processing faces for large stamped and formed parts and sub-assemblies 500 1/min300 kN50 kN Technical data 
Bihler BZ2-S8 High-performance processing centre driven by servo motors for mass production of stamped and formed parts and sub-assemblies 700 1/min300 kN50 kN Technical data