500 strokes per minute
High-performance machine system with two processing faces for mass production of large stamped and formed parts and sub-assemblies; the stroke rate is steplessly variable from 5 to 500 1/min.
Multicenter
Bihler MCS 05
High-speed multi-slide machine with two processing faces for large stamped and formed parts and sub-assemblies
500 1/min Stroke rate
300 kN Press force
50 kN Slide force (max.)
60 mm Strip width
Ø 6 mm Wire diameter
ⓘ Manufacturer data (Bihler MCS 05 product page); depends on material and process. Values may change and vary; not binding on Boztaş.
Why MCS 05?
Radial and linear production on one machine
Parts and simple sub-assemblies are produced radially and linearly together on the same machine; slide units of up to 50 kN can be mounted linearly and radially.
Dynamic feed, transverse transport
A highly dynamic material feed unit shortens feeding times; the large opening in the centre allows transverse transport from face A to face B or vice versa. Operation via the VariControl VC 1 control.
Technical data
| Feature | MCS 05 |
|---|---|
| Performance | |
| Stroke rate | 5 – 500 1/min, stepless |
| Press | 300 kN, stroke 16 mm |
| Slide units | max. 50 kN, stroke max. 50 mm |
| Tool area and feed | |
| Feed | Mechanical max. 160 mm (without feed-time reduction); servo feed: unlimited |
| Material | |
| Strip thickness / width | max. 6 mm / 60 mm |
| Wire diameter | max. Ø 6 mm |
| Control | |
| Control | VariControl VC 1 |
| Dimensions and weight | |
| Dimensions (W×D×H) | 3,360 × 2,250 × 2,390 mm |
| Weight (without tools) | approx. 5,000 kg |
Manufacturer data (Bihler MCS 05 product page); depends on material and process.
Technical data is taken from information published by the manufacturer. The manufacturer may change it without notice, and values may vary with the model and the machine configuration. The data is for information only and is not binding on Boztaş; binding values are stated only in a written quotation.
Processes that can be combined on this machine
- Stamping
- Bending
Typical workpieces
- Large stamped and formed parts and sub-assemblies (größere Stanzbiegeteile und Baugruppen)
Frequently asked questions
What is the difference between the MCS 05 and the MCS 1?
Both are high-speed Multicenter machines with two processing faces. The MCS 05 runs at up to 500 strokes per minute, with a 300 kN press (stroke 16 mm), 50 kN slide units and a capacity of 6 × 60 mm strip and Ø 6 mm wire. The MCS 1 is specified with 800 1/min, a 70 kN press (stroke 8 mm), 30 kN slide units, 4 × 45 mm strip and Ø 4 mm wire.
Which feed options does the MCS 05 offer?
The mechanical feed feeds up to 160 mm without feed-time reduction; with the servo feed the feed length is unlimited.
Other Bihler models
Bihler GRM 80 Universal multi-slide machine for large stamped and bent parts 250 1/min300–400 kN80 mm Technical data 
Bihler RM 40 Compact multi-slide machines for mass production of small precision stamped and formed parts 350 1/min90–200 kN60 mm Technical data 
Bihler RM 30K Compact multi-slide machine for mass production of small stamped and formed metal parts 350 1/min90 kN900 mm Technical data 
Bihler GRM-NC Universal servo multi-slide machine for small and medium batches 250 1/min400 kN90 mm Technical data 
Bihler RM-NC Servo multi-slide machine for small and medium batches with radial tooling 300 1/min200 kN80 mm Technical data 
Bihler BNC 4 Servo multi-slide production system compatible with MRP tooling 300 1/min200 kN31 kN Technical data 
Bihler BIMERIC BM Modular servo production and assembly system from raw material to ready-to-install assemblies 250 1/min400 kN80 mm Technical data 
Bihler BIMERIC SP Sub-assembly production system combining a servo press with the BIMERIC platform for progressive dies 250 1/min500 kN15–63 mm Technical data 
Bihler BM-HP 3000 Servo system producing complete electric-motor hairpins from flat wire on the coil 60–120/min3.2 m/s±0.02 mm Technical data 
Bihler LM 2000-KT / LM 2000-NC Modular linear machine platform with cam-controlled (KT) or servo-controlled (NC) units 500 1/min250 1/min2,000 mm Technical data 
Bihler SP 800 800 kN servo press for progressive tools; stand-alone or combined with the BIMERIC 800 kN200 1/min30 mm Technical data 
Bihler RM S High-speed multi-slide machine for stamped and formed parts made from high-tensile steels 600 1/min150 kN900 mm Technical data 
Bihler GRM 80B Bushing machine with a standardised tooling concept for mass production of straight and flanged bushings 220 1/min160 1/min15–40 mm Technical data 
Bihler MC 42 Multi-slide machine with two processing faces for small stamped and formed parts and sub-assemblies 350 1/min90 kN60 kN Technical data 
Bihler MC 82 Multi-slide machine with two processing faces for larger stamped and formed parts and sub-assemblies 250 1/min300 kN90 kN Technical data 
Bihler MC 120 Multi-slide machine with a 700 kN press and two processing faces for large stamped and formed parts and sub-assemblies 150 1/min700 kN160 kN Technical data 
Bihler MCS 1 High-speed multi-slide machine with two processing faces, running at up to 800 strokes per minute 800 1/min70 kN30 kN Technical data 
Bihler BZ2-S8 High-performance processing centre driven by servo motors for mass production of stamped and formed parts and sub-assemblies 700 1/min300 kN50 kN Technical data 
Bihler CC 1 COMBITEC processing centre with a separate 800 kN press module for long, bulky stamped and formed parts and sub-assemblies 200 1/min800 kN160 kN Technical data