Since 198343 years serving Turkish industry
Mechanical and hybrid multi-slide
Bushing machine with a standardised tooling concept for mass production of straight and flanged bushings
ⓘ Manufacturer data (Bihler GRM 80B product page); depends on material and process. Values may change and vary; not binding on Boztaş.
The bushing tool consists of a basic tool, two tool-holder sets and the active parts. According to the manufacturer, tool change-over times are very short, and for international use only the active parts need to be shipped.
Up to 220 1/min for cylindrical straight bushings and up to 160 1/min for flanged and collar bushings; bushing inner diameter 15–40 mm, bushing length up to 50 mm.
The RZV 2.1 servo feed feeds the strip material to the machine; operation is via the VariControl VC 1E control.
| Feature | GRM 80B |
|---|---|
| Performance | |
| Stroke rate | max. 220 1/min (cylindrical straight bushings); max. 160 1/min (flanged / collar bushings) |
| Press | 100 kN nominal stamping force, stroke 12 mm |
| Slide units | 50 kN nominal forming force, stroke 50 mm |
| Tool area and feed | |
| Tool system | Standardised bushing tool: basic tool, 2 tool-holder sets, active parts |
| Feed | RZV 2.1 servo feed |
| Material | |
| Strip thickness / width | max. 2 mm / 50 mm |
| Bushing dimensions | Inner diameter 15–40 mm, length max. 50 mm |
| Control | |
| Control | VariControl VC 1E |
| Dimensions and weight | |
| Dimensions (W×D×H) | 3,140 × 1,895 × 2,030 mm |
| Weight | approx. 4,800 kg |
Manufacturer data (Bihler GRM 80B product page); depends on material and process. The English page gives a height of 2,030 mm, the German page 2,220 mm with the note 'mit LSK'.
Technical data is taken from information published by the manufacturer. The manufacturer may change it without notice, and values may vary with the model and the machine configuration. The data is for information only and is not binding on Boztaş; binding values are stated only in a written quotation.
According to the product page, the bushing inner diameter is 15–40 mm and the bushing length up to 50 mm. Strip thickness is up to 2 mm and strip width up to 50 mm (depending on material and process).
No; the figures are up to 220 1/min for cylindrical straight bushings and up to 160 1/min for flanged and collar bushings.
The standardised bushing tool consists of a basic tool, two tool-holder sets and the active parts. According to the manufacturer, only the active parts need to be shipped for international use.
Bihler GRM 80 Universal multi-slide machine for large stamped and bent parts 250 1/min300–400 kN80 mm Technical data 
Bihler RM 40 Compact multi-slide machines for mass production of small precision stamped and formed parts 350 1/min90–200 kN60 mm Technical data 
Bihler RM 30K Compact multi-slide machine for mass production of small stamped and formed metal parts 350 1/min90 kN900 mm Technical data 
Bihler GRM-NC Universal servo multi-slide machine for small and medium batches 250 1/min400 kN90 mm Technical data 
Bihler RM-NC Servo multi-slide machine for small and medium batches with radial tooling 300 1/min200 kN80 mm Technical data 
Bihler BNC 4 Servo multi-slide production system compatible with MRP tooling 300 1/min200 kN31 kN Technical data 
Bihler BIMERIC BM Modular servo production and assembly system from raw material to ready-to-install assemblies 250 1/min400 kN80 mm Technical data 
Bihler BIMERIC SP Sub-assembly production system combining a servo press with the BIMERIC platform for progressive dies 250 1/min500 kN15–63 mm Technical data 
Bihler BM-HP 3000 Servo system producing complete electric-motor hairpins from flat wire on the coil 60–120/min3.2 m/s±0.02 mm Technical data 
Bihler LM 2000-KT / LM 2000-NC Modular linear machine platform with cam-controlled (KT) or servo-controlled (NC) units 500 1/min250 1/min2,000 mm Technical data 
Bihler SP 800 800 kN servo press for progressive tools; stand-alone or combined with the BIMERIC 800 kN200 1/min30 mm Technical data 
Bihler RM S High-speed multi-slide machine for stamped and formed parts made from high-tensile steels 600 1/min150 kN900 mm Technical data 
Bihler MC 42 Multi-slide machine with two processing faces for small stamped and formed parts and sub-assemblies 350 1/min90 kN60 kN Technical data 
Bihler MC 82 Multi-slide machine with two processing faces for larger stamped and formed parts and sub-assemblies 250 1/min300 kN90 kN Technical data 
Bihler MC 120 Multi-slide machine with a 700 kN press and two processing faces for large stamped and formed parts and sub-assemblies 150 1/min700 kN160 kN Technical data 
Bihler MCS 1 High-speed multi-slide machine with two processing faces, running at up to 800 strokes per minute 800 1/min70 kN30 kN Technical data 
Bihler MCS 05 High-speed multi-slide machine with two processing faces for large stamped and formed parts and sub-assemblies 500 1/min300 kN50 kN Technical data 
Bihler BZ2-S8 High-performance processing centre driven by servo motors for mass production of stamped and formed parts and sub-assemblies 700 1/min300 kN50 kN Technical data 
Bihler CC 1 COMBITEC processing centre with a separate 800 kN press module for long, bulky stamped and formed parts and sub-assemblies 200 1/min800 kN160 kN Technical data