Since 198343 years serving Turkish industry
Linear machines
Modular linear machine platform with cam-controlled (KT) or servo-controlled (NC) units
ⓘ Manufacturer data (Bihler LM 2000-KT / LM 2000-NC product page); depends on material and process. Values may change and vary; not binding on Boztaş.
The units in the forming area are cam-controlled on the LM 2000-KT and servo-controlled on the LM 2000-NC. The manufacturer positions the KT for medium to large batches (few variants) and the NC for small to medium batches (many variants).
The press area is compatible with Meusburger SBP 400 and SBH 400 standard cutting frames; the module stations in the linear area have standard interfaces and a zero-point clamping system with hydraulic clamping. Tools can be shared across the Bihler Modular Series machines (LM 2000-KT/-NC, BIMERIC, GRM-NC).
Each of the five module stations in the linear area offers up to three movements from three directions (top, bottom, 3rd level). The platform can be extended with modules for screw joining (MSE 250), thread forming (GSE 250), laser welding (LSM 250) and insulator assembly (MMI 250).
Cam-controlled slide units in the forming area (max. 31 kN, stroke max. 28 mm); up to 500 1/min. Manual quicklift to reach the set-up and maintenance position without changing the cam; cams are replaced with a quick-change system.
Suited to: Medium to large batches, few variants
Servo units in the forming area (max. 31 kN, stroke max. 100 mm); up to 250 1/min. Operating stroke, position and motion profile are freely programmable; manual interventions such as cam changes and stroke position adjustment are no longer needed.
Suited to: Small to medium batches, many variants
| Feature | LM 2000-KT | LM 2000-NC |
|---|---|---|
| Performance | ||
| Stroke rate | stepless, max. 500 1/min | stepless, max. 250 1/min |
| Press | 400 kN eccentric press; fixed stroke 16 mm; stroke position adjustment 3.5 mm, stepless | 400 kN eccentric press; fixed stroke 16 mm; stroke position adjustment 3.5 mm, stepless |
| Forming units | Cam-controlled slide units: max. 31 kN; stroke max. 28 mm; stroke position adjustment 28 mm, stepless | Servo (NC) units: max. 31 kN; stroke max. 100 mm; stroke, position and motion profile freely programmable |
| Movements (linear area) | Up to three at each of 5 module stations, up to 15 in total; optional servo slide unit under the press | Up to three at each of 5 module stations, up to 15 in total; optional servo slide unit under the press |
| Tool area and feed | ||
| Processing length | 2,000 mm | 2,000 mm |
| Press tool area | Compatible with Meusburger SBP 400 / SBH 400 standard cutting frames; nominal cutting-frame height at BDC 208 ±0.05 mm; table length 670 mm | Compatible with Meusburger SBP 400 / SBH 400 standard cutting frames; nominal cutting-frame height at BDC 208 ±0.05 mm; table length 670 mm |
| Tool clamping (linear area) | Standard interfaces; zero-point clamping system with hydraulic clamping | Standard interfaces; zero-point clamping system with hydraulic clamping |
| NC central mandrel | max. 5; max. 8.9 kN; stroke max. 95 mm | max. 5; max. 8.9 kN; stroke max. 95 mm |
| Feed | RZV 2.1 servo radial gripper feed; any feed length | RZV 2.1 servo radial gripper feed; any feed length |
| HLT 250 linear tool modules | max. 500 1/min; strip thickness 0.1–1.0 mm; module change < 10 min | — |
| Material | ||
| Strip width | max. 80 mm | max. 80 mm |
| Strip thickness | depends on material and process | depends on material and process |
| Control | ||
| Control | VariControl VC 1 (version 3.0); 24-inch multi-touch display | VariControl VC 1 (version 3.0); 24-inch multi-touch display |
| Monitoring | Press force monitoring (with overload protection) and bearing temperature monitoring; overload sensors in the slide units | Press force monitoring (with overload protection) and bearing temperature monitoring; software overload protection and absolute measuring system in the NC units |
| Lubrication | Oil circulation lubrication (oil temperature, fill level and contamination monitored); central lubrication system with two circuits | Oil circulation lubrication (oil temperature, fill level and contamination monitored); central lubrication system with two circuits |
| Data interface | OPC UA as standard; machine conditions can be transferred to an MES or ERP system | OPC UA as standard; machine conditions can be transferred to an MES or ERP system |
| Dimensions and weight | ||
| Weight (without tools) | approx. 8,000 kg | approx. 8,000 kg |
Manufacturer data (Bihler LM 2000-KT / LM 2000-NC product page); depends on material and process. The OPC UA row is taken from the Bihler Modular Series page.
Technical data is taken from information published by the manufacturer. The manufacturer may change it without notice, and values may vary with the model and the machine configuration. The data is for information only and is not binding on Boztaş; binding values are stated only in a written quotation.
Related industries: Electronics and Connectors
Both are the same machine platform: 2,000 mm processing length, 400 kN press, strip up to 80 mm wide. They differ in the processing units in the linear area. The LM 2000-KT has cam-controlled slide units and reaches 500 1/min; the LM 2000-NC has servo units, reaches 250 1/min, and its stroke, position and motion profile are freely programmable.
The press area is compatible with Meusburger SBP 400 and SBH 400 standard cutting frames. The module stations in the linear area have standard interfaces and a zero-point clamping system with hydraulic clamping; tools can be shared across the Bihler Modular Series machines (LM 2000-KT/-NC, BIMERIC, GRM-NC).
The MSE 250 screw joining, GSE 250 thread forming, LSM 250 laser welding and MMI 250 insulator assembly modules can be added. Their software is included in the VC 1 control as standard, and each module can be set up in different positions to suit the process.
Bihler GRM 80 Universal multi-slide machine for large stamped and bent parts 250 1/min300–400 kN80 mm Technical data 
Bihler RM 40 Compact multi-slide machines for mass production of small precision stamped and formed parts 350 1/min90–200 kN60 mm Technical data 
Bihler RM 30K Compact multi-slide machine for mass production of small stamped and formed metal parts 350 1/min90 kN900 mm Technical data 
Bihler GRM-NC Universal servo multi-slide machine for small and medium batches 250 1/min400 kN90 mm Technical data 
Bihler RM-NC Servo multi-slide machine for small and medium batches with radial tooling 300 1/min200 kN80 mm Technical data 
Bihler BNC 4 Servo multi-slide production system compatible with MRP tooling 300 1/min200 kN31 kN Technical data 
Bihler BIMERIC BM Modular servo production and assembly system from raw material to ready-to-install assemblies 250 1/min400 kN80 mm Technical data 
Bihler BIMERIC SP Sub-assembly production system combining a servo press with the BIMERIC platform for progressive dies 250 1/min500 kN15–63 mm Technical data 
Bihler BM-HP 3000 Servo system producing complete electric-motor hairpins from flat wire on the coil 60–120/min3.2 m/s±0.02 mm Technical data 
Bihler SP 800 800 kN servo press for progressive tools; stand-alone or combined with the BIMERIC 800 kN200 1/min30 mm Technical data 
Bihler RM S High-speed multi-slide machine for stamped and formed parts made from high-tensile steels 600 1/min150 kN900 mm Technical data 
Bihler GRM 80B Bushing machine with a standardised tooling concept for mass production of straight and flanged bushings 220 1/min160 1/min15–40 mm Technical data 
Bihler MC 42 Multi-slide machine with two processing faces for small stamped and formed parts and sub-assemblies 350 1/min90 kN60 kN Technical data 
Bihler MC 82 Multi-slide machine with two processing faces for larger stamped and formed parts and sub-assemblies 250 1/min300 kN90 kN Technical data 
Bihler MC 120 Multi-slide machine with a 700 kN press and two processing faces for large stamped and formed parts and sub-assemblies 150 1/min700 kN160 kN Technical data 
Bihler MCS 1 High-speed multi-slide machine with two processing faces, running at up to 800 strokes per minute 800 1/min70 kN30 kN Technical data 
Bihler MCS 05 High-speed multi-slide machine with two processing faces for large stamped and formed parts and sub-assemblies 500 1/min300 kN50 kN Technical data 
Bihler BZ2-S8 High-performance processing centre driven by servo motors for mass production of stamped and formed parts and sub-assemblies 700 1/min300 kN50 kN Technical data 
Bihler CC 1 COMBITEC processing centre with a separate 800 kN press module for long, bulky stamped and formed parts and sub-assemblies 200 1/min800 kN160 kN Technical data