Stand-alone or with the BIMERIC
The servo press can run on its own or be combined with a BIMERIC; it is expandable to up to 76 movements, and motions can be implemented from all directions.
Servo presses
Bihler SP 800
800 kN servo press for progressive tools; stand-alone or combined with the BIMERIC
800 kN Nominal force
200 1/min Stroke rate
30 mm Fixed stroke
1,000 × 510 mm Tool mounting plate
160 mm Strip width (column opening)
ⓘ Manufacturer data (Bihler SP 800 product page). Values may change and vary; not binding on Boztaş.
Why SP 800?
Direct drive with torque motor
A highly dynamic torque motor allows flexible motion sequences in the forming process. Programming needs only three values: stroke length, feed and the opening at bottom dead centre.
Progressive tool integration
Existing or new progressive tools are integrated using the programmable stroke position adjustment; quick-change tool systems and integrated sensor systems are included.
Technical data
| Feature | SP 800 |
|---|---|
| Performance | |
| Stroke rate | max. 200 1/min |
| Nominal force | 800 kN |
| Stroke | fixed 30 mm |
| Stroke position adjustment | −8 mm from BDC |
| Drive | Direct drive via a highly dynamic torque motor |
| Tool area and feed | |
| Tool mounting plate (L×W) | 1,000 × 510 mm |
| Opening at BDC | 324.5 mm |
| Column opening (max. strip width) | 160 mm |
| Expansion | up to 76 movements |
| Control | |
| Control | VariControl VC 1 |
| Monitoring | Integrated sensor systems |
Manufacturer data (Bihler SP 800 product page).
Technical data is taken from information published by the manufacturer. The manufacturer may change it without notice, and values may vary with the model and the machine configuration. The data is for information only and is not binding on Boztaş; binding values are stated only in a written quotation.
Processes that can be combined on this machine
- Forming with progressive tools
Frequently asked questions
Can the SP 800 run stand-alone?
Yes; the manufacturer describes the SP 800 as a servo press for stand-alone operation or in combination with the BIMERIC.
Which values are needed to program the SP 800?
Three values are enough: stroke length, feed and the opening at bottom dead centre.
How large is the tool area of the SP 800?
The tool mounting plate measures 1,000 × 510 mm (length × width) and the opening at bottom dead centre is 324.5 mm; the column opening allows a strip width of up to 160 mm.
Other Bihler models
Bihler GRM 80 Universal multi-slide machine for large stamped and bent parts 250 1/min300–400 kN80 mm Technical data 
Bihler RM 40 Compact multi-slide machines for mass production of small precision stamped and formed parts 350 1/min90–200 kN60 mm Technical data 
Bihler RM 30K Compact multi-slide machine for mass production of small stamped and formed metal parts 350 1/min90 kN900 mm Technical data 
Bihler GRM-NC Universal servo multi-slide machine for small and medium batches 250 1/min400 kN90 mm Technical data 
Bihler RM-NC Servo multi-slide machine for small and medium batches with radial tooling 300 1/min200 kN80 mm Technical data 
Bihler BNC 4 Servo multi-slide production system compatible with MRP tooling 300 1/min200 kN31 kN Technical data 
Bihler BIMERIC BM Modular servo production and assembly system from raw material to ready-to-install assemblies 250 1/min400 kN80 mm Technical data 
Bihler BIMERIC SP Sub-assembly production system combining a servo press with the BIMERIC platform for progressive dies 250 1/min500 kN15–63 mm Technical data 
Bihler BM-HP 3000 Servo system producing complete electric-motor hairpins from flat wire on the coil 60–120/min3.2 m/s±0.02 mm Technical data 
Bihler LM 2000-KT / LM 2000-NC Modular linear machine platform with cam-controlled (KT) or servo-controlled (NC) units 500 1/min250 1/min2,000 mm Technical data 
Bihler RM S High-speed multi-slide machine for stamped and formed parts made from high-tensile steels 600 1/min150 kN900 mm Technical data 
Bihler GRM 80B Bushing machine with a standardised tooling concept for mass production of straight and flanged bushings 220 1/min160 1/min15–40 mm Technical data 
Bihler MC 42 Multi-slide machine with two processing faces for small stamped and formed parts and sub-assemblies 350 1/min90 kN60 kN Technical data 
Bihler MC 82 Multi-slide machine with two processing faces for larger stamped and formed parts and sub-assemblies 250 1/min300 kN90 kN Technical data 
Bihler MC 120 Multi-slide machine with a 700 kN press and two processing faces for large stamped and formed parts and sub-assemblies 150 1/min700 kN160 kN Technical data 
Bihler MCS 1 High-speed multi-slide machine with two processing faces, running at up to 800 strokes per minute 800 1/min70 kN30 kN Technical data 
Bihler MCS 05 High-speed multi-slide machine with two processing faces for large stamped and formed parts and sub-assemblies 500 1/min300 kN50 kN Technical data 
Bihler BZ2-S8 High-performance processing centre driven by servo motors for mass production of stamped and formed parts and sub-assemblies 700 1/min300 kN50 kN Technical data 
Bihler CC 1 COMBITEC processing centre with a separate 800 kN press module for long, bulky stamped and formed parts and sub-assemblies 200 1/min800 kN160 kN Technical data