Two processing faces
Machine system with two processing faces for mass production of large stamped and formed parts and sub-assemblies; the individual parts of complex products are produced simultaneously.
Multicenter
Bihler MC 120
Multi-slide machine with a 700 kN press and two processing faces for large stamped and formed parts and sub-assemblies
150 1/min Stroke rate
700 kN Press force
160 kN Slide force (max.)
160 mm Strip width (lengthwise)
Ø 10 mm Wire diameter
ⓘ Manufacturer data (Bihler MC 120 product page); depends on material and process. Values may change and vary; not binding on Boztaş.
Why MC 120?
700 kN press, 10 mm strip
The 700 kN press allows strip thicknesses of up to 10 mm to be processed; strip widths of up to 320 mm can be fed.
Strong slides, large centre aperture
The slide units offer up to 160 kN nominal force and up to 140 mm stroke; the large centre aperture allows additional movements. Operation via the VariControl VC 1 control.
Technical data
| Feature | MC 120 |
|---|---|
| Performance | |
| Stroke rate | 5 – 150 1/min, stepless |
| Press | 700 kN, stroke 16 mm |
| Slide units | max. 160 kN, stroke max. 140 mm |
| Tool area and feed | |
| Feed | Mechanical (with feed-time reduction): lengthwise max. 350 mm, crosswise max. 150 mm; servo feed: unlimited |
| Material | |
| Strip thickness | max. 10 mm |
| Strip width | lengthwise max. 160 mm; crosswise max. 320 mm |
| Wire diameter | max. Ø 10 mm |
| Control | |
| Control | VariControl VC 1 |
| Dimensions and weight | |
| Dimensions (W×D×H) | 3,580 × 2,670 × 2,610 mm |
| Weight (without tools) | approx. 10,000 kg |
Manufacturer data (Bihler MC 120 product page); depends on material and process.
Technical data is taken from information published by the manufacturer. The manufacturer may change it without notice, and values may vary with the model and the machine configuration. The data is for information only and is not binding on Boztaş; binding values are stated only in a written quotation.
Processes that can be combined on this machine
- Stamping
- Bending
Typical workpieces
- Large stamped and formed parts and sub-assemblies (große Stanzbiegeteile und Baugruppen)
Frequently asked questions
What is the difference between the MC 120, the MC 42 and the MC 82?
All three are Multicenter machines with two processing faces. The MC 120 runs at up to 150 strokes per minute, with a 700 kN press, 160 kN slide units and a capacity of 10 × 160 mm strip and Ø 10 mm wire. The MC 42 is specified with 350 1/min, a 90 kN press, 60 kN slide units, 4 × 60 mm strip and Ø 4 mm wire; the MC 82 with 250 1/min, a 300 kN press, 90 kN slide units, 6 × 80 mm strip and Ø 6 mm wire.
Which feed options does the MC 120 offer?
The mechanical feed with feed-time reduction feeds up to 350 mm lengthwise and up to 150 mm crosswise; with the servo feed the feed length is unlimited. Strip width is up to 160 mm lengthwise and up to 320 mm crosswise.
Other Bihler models
Bihler GRM 80 Universal multi-slide machine for large stamped and bent parts 250 1/min300–400 kN80 mm Technical data 
Bihler RM 40 Compact multi-slide machines for mass production of small precision stamped and formed parts 350 1/min90–200 kN60 mm Technical data 
Bihler RM 30K Compact multi-slide machine for mass production of small stamped and formed metal parts 350 1/min90 kN900 mm Technical data 
Bihler GRM-NC Universal servo multi-slide machine for small and medium batches 250 1/min400 kN90 mm Technical data 
Bihler RM-NC Servo multi-slide machine for small and medium batches with radial tooling 300 1/min200 kN80 mm Technical data 
Bihler BNC 4 Servo multi-slide production system compatible with MRP tooling 300 1/min200 kN31 kN Technical data 
Bihler BIMERIC BM Modular servo production and assembly system from raw material to ready-to-install assemblies 250 1/min400 kN80 mm Technical data 
Bihler BIMERIC SP Sub-assembly production system combining a servo press with the BIMERIC platform for progressive dies 250 1/min500 kN15–63 mm Technical data 
Bihler BM-HP 3000 Servo system producing complete electric-motor hairpins from flat wire on the coil 60–120/min3.2 m/s±0.02 mm Technical data 
Bihler LM 2000-KT / LM 2000-NC Modular linear machine platform with cam-controlled (KT) or servo-controlled (NC) units 500 1/min250 1/min2,000 mm Technical data 
Bihler SP 800 800 kN servo press for progressive tools; stand-alone or combined with the BIMERIC 800 kN200 1/min30 mm Technical data 
Bihler RM S High-speed multi-slide machine for stamped and formed parts made from high-tensile steels 600 1/min150 kN900 mm Technical data 
Bihler GRM 80B Bushing machine with a standardised tooling concept for mass production of straight and flanged bushings 220 1/min160 1/min15–40 mm Technical data 
Bihler MC 42 Multi-slide machine with two processing faces for small stamped and formed parts and sub-assemblies 350 1/min90 kN60 kN Technical data 
Bihler MC 82 Multi-slide machine with two processing faces for larger stamped and formed parts and sub-assemblies 250 1/min300 kN90 kN Technical data 
Bihler MCS 1 High-speed multi-slide machine with two processing faces, running at up to 800 strokes per minute 800 1/min70 kN30 kN Technical data 
Bihler MCS 05 High-speed multi-slide machine with two processing faces for large stamped and formed parts and sub-assemblies 500 1/min300 kN50 kN Technical data 
Bihler BZ2-S8 High-performance processing centre driven by servo motors for mass production of stamped and formed parts and sub-assemblies 700 1/min300 kN50 kN Technical data 
Bihler CC 1 COMBITEC processing centre with a separate 800 kN press module for long, bulky stamped and formed parts and sub-assemblies 200 1/min800 kN160 kN Technical data